TIPS refill your own ink cartridges HP No. 21 on the HP Deskjet D2466 Printer
For those of you who struggle to refill black cartridges No. 21 of the HP Deskjet D2466 printer, following my experience merifillnya, may be useful.
Cartridge No. 21 mine is still the original default printer, its features if you look at it turns out the black cartridge No. 21 and No. 22 color cartridges original default printer is no introductory text on the sticker affixed to the above cartridges.
Steps refill ink cartridges black No 21.
1. Purchase an ink refill, instead of advertising (and I also do not get paid for this) but I use the brand
DATAPRINT DP series 27 which can be used for cartridge hp no 21, 27 and 56.
DATAPRINT DP series 27 which can be used for cartridge hp no 21, 27 and 56.
2. Prepare and clean a piece of dry tissue.
3. On injection of ink that we will use to refill, open the ink cover, and mount an injection needle
connection diujungkan (bentukknaya is exactly like a syringe).
connection diujungkan (bentukknaya is exactly like a syringe).
4. Turn on your printer (computer not live nor anything).
5. Open the cover of the printer, then automatically both katridnya No. 22 and 21 will shift its position
to the center of the printer, and lamp power (lights leftmost position) in the printer will blink.
to the center of the printer, and lamp power (lights leftmost position) in the printer will blink.
6. Remove the cartridge No 21 of the cradle in a printer, a bit difficult to explain the technique, but is
simply put the middle finger and index finger above the existing cartridges lump, while the thumb to
hold down the front of the cartridge, and then stayed pull your middle finger and index finger, then
will copotlah cartridge from the holder. (Be careful in treating the cartridges, do it all once you touch
the ink discharge HEAD place under the cartridges, and do not touch the copper connectors are the
spots that are useful for connecting the cartridge with the printer cartridge holder). Because the
original is still the default printer cartridges, then only fit about 5 cc in one refill, then the technique
merefilnya should drop by drop, and it is rather long, can be about 10 minutes.
simply put the middle finger and index finger above the existing cartridges lump, while the thumb to
hold down the front of the cartridge, and then stayed pull your middle finger and index finger, then
will copotlah cartridge from the holder. (Be careful in treating the cartridges, do it all once you touch
the ink discharge HEAD place under the cartridges, and do not touch the copper connectors are the
spots that are useful for connecting the cartridge with the printer cartridge holder). Because the
original is still the default printer cartridges, then only fit about 5 cc in one refill, then the technique
merefilnya should drop by drop, and it is rather long, can be about 10 minutes.
7. Open the cartridge pad sticker over the top (that means you can read the writing on the sticker with
no reverse), just one-third, or until you see the ink filling holes in the middle position.
no reverse), just one-third, or until you see the ink filling holes in the middle position.
Take the injection of ink refill and put the filling in the cartridge above the hole approximately 0.5 cm,
and press gently until the tip of the injection needle visible ink clump together, then insert the tip of
the ink collecting syringe into the filling hole by hole rather stick to his side, so that the hole remains
open is not met by the droplets of ink, if it turns out the ink cartridge cover the filling hole, then blow
with the wind from your mouth to open the lock. (Must be viewed in the light, or if the lights are
bright evening wear, I'll fill a hole in the cartridge can be seen clearly).
and press gently until the tip of the injection needle visible ink clump together, then insert the tip of
the ink collecting syringe into the filling hole by hole rather stick to his side, so that the hole remains
open is not met by the droplets of ink, if it turns out the ink cartridge cover the filling hole, then blow
with the wind from your mouth to open the lock. (Must be viewed in the light, or if the lights are
bright evening wear, I'll fill a hole in the cartridge can be seen clearly).
8. Repeat step No. 8 above until the cartridge is full or can not be filled again. Or more simply mark the
first time to start injecting ink refill on any number, eg number 20, and stop after arriving at number
15, so that is loaded is 5 cc.
9. Repeat step No. 8 above until the cartridge is full or not
filled again. Or more simply mark the first time the ink injection
start a refill on any number, eg number 20, and
stop after arriving at number 15, so that is loaded
is 5 cc.
10. Clean around the hole filling with tissue that has been
provided was clean.
11. Close the little sticker that had been exfoliated, close
in the original, because there is a mechanism of respiratory cartridges
through the winding paths covered by the sticker,
but diujungnya open.
12. Replace your cartridges into the printer cradle.
13. Close the back cover of the printer.
14. Your printer is ready to be used again for ngeprint text or
black color image.
So my technique in the fill / refill HP cartridges black No 21, there may be a lack of perfection and there is a better technique, please be sharing here. Because if you fill 5cc directly injected at the same time, I make sure the ink will spill over and contaminate cartridges, and can-can cartridge broken finger.
Refill your own means you will save time and money. Due to refill printer cartridges of black luggage, yesterday I got 21ribu. However, if we can buy an ink refill 40 cc, could mean 8 times refill, maybe even more.
first time to start injecting ink refill on any number, eg number 20, and stop after arriving at number
15, so that is loaded is 5 cc.
9. Repeat step No. 8 above until the cartridge is full or not
filled again. Or more simply mark the first time the ink injection
start a refill on any number, eg number 20, and
stop after arriving at number 15, so that is loaded
is 5 cc.
10. Clean around the hole filling with tissue that has been
provided was clean.
11. Close the little sticker that had been exfoliated, close
in the original, because there is a mechanism of respiratory cartridges
through the winding paths covered by the sticker,
but diujungnya open.
12. Replace your cartridges into the printer cradle.
13. Close the back cover of the printer.
14. Your printer is ready to be used again for ngeprint text or
black color image.
So my technique in the fill / refill HP cartridges black No 21, there may be a lack of perfection and there is a better technique, please be sharing here. Because if you fill 5cc directly injected at the same time, I make sure the ink will spill over and contaminate cartridges, and can-can cartridge broken finger.
Refill your own means you will save time and money. Due to refill printer cartridges of black luggage, yesterday I got 21ribu. However, if we can buy an ink refill 40 cc, could mean 8 times refill, maybe even more.
No comments:
Post a Comment